Existing Temporary Water Connection
An existing water connection to a property can be used during construction. Throughout the construction period the meter and box shall be free of obstructions and debris or service will be discontinued. To initiate a temporary water connection the following must be completed:
- A responsible person or company must sign for the water account. Contact 310-458-8226.
- If the existing structure is to be demolished then the water line to the structure must be separated and a construction riser shall be installed.
- Call the Water Resources Division at 310-458-8535 to have the water shut off if it is currently on. The curb stop in the meter box is to be operated by Water Personnel ONLY!
- Sever the line on property and make a connection to meter coupling bringing service line through meter box onto property. Riser shall be installed just inside property line free of obstructions with a shut off valve a minimum of 12" above grade level. After the shut off valve, place your temporary water connection. (See Picture Below).
- Call the Water Resources Division for an inspection of the connection and to have the water turned on.
- All piping upstream of shut off valve must be approved water pipe made of ferrous material.
For any further questions please contact the Water Resources Division at 310-458-8535.
Hydrant Meter Connection
A fire hydrant meter is primarily used to fill an approved water truck for temporary use. To obtain a hydrant meter connection you must fill out an application and pay a $375 fee for three months. A completed application must be turned in at the Water Resource Division's Utility Office located at 1212 5 th Street in Santa Monica , on the third floor.
Once the above requirements are complete a representative will contact you within a few days to schedule a meeting out in the field. If you have more detailed questions please call 310-458-8535 or refer to the Hydrant Meter Connection manual.
Hydrant Meter Program Manual
Application for the Fire Hydrant (doc)
|